Aim Kit for SoloDL on Suzuki GSX-R User Manual

1 AiM User Guide Kit for EVO4, Solo and SoloDL on Suzuki GSX-R Release 1.02

9 The image here below shows SoloDL correctly installed.

10 3.2 Connection of SoloDL and EVO4 to the bike ECU To connect EVO4 and SoloDL to the ECU of the bike use the connector you find under the bike sea

11 Connect AiM wiring to Suzuki wiring as here on the right. If you have installed an AiM EVO4 logger take the cable to the logger. If you have inst

12 Connect the cable to SoloDL as here on the right.

13 4 Configuring with Race Studio 2 Before connecting SoloDL/EVO4 to the ECU set it up as connected to that ECU using Race Studio 2 software. 4.1 Co

14 The software shows SoloDL configuration page: press “Configuration Manager” and select the configuration you want to use or press “New” to create

15 4.2 Configuring EVO4 Run the software, press “Device configuration” on the software left keyboard and select “EVO4” in the panel that shows up on

16 The software shows EVO4 configuration page: select the configuration you want to use or press “New” to create a new one. In this second case “New

17 5 Suzuki SDS protocol Channels received by SoloDL and EVO4 connected to Suzuki “SDS_Protocol” are: ID CHANNEL NAME FUNCTION ECU_1 SDS_RPM RPM E

1 1 Models and years This user guide explains how to install AiM Solo and SoloDL on Suzuki GSX-R bikes and how to connect EVO4 and SoloDL to the Eng

2 2.1 SoloDL kit SoloDL installation kit is shown here below; part number is: V02569140CS. The kit includes: • 1 bracket (1) • 1 8x45 pan head All

3 2.2 AiM cable for SoloDL Suzuki GSX-R cable for SoloDL is shown below; its part number is: V02569140. Here below cable constructive scheme is sho

4 2.3 AiM cable for EVO4 Suzuki GSX-R cable for EVO4 is shown below; its part number is: V02563140. The cable has a built in resistor for K Line sig

5 3 Installation and connection Here you find the instructions to install Solo and SoloDL and to connect EVO4 and SoloDL to your Suzuki GSX-R bike E

6 Fix Solo/SoloDL bracket to the adapter bracket for Suzuki GSX-R using the two countersunk screws you find in the kit. Screw the 8x45 pan head All

7 Insert the assembled kit in the handle bar hinge until the distance piece abuts the hinge. Tighten the central screw on the hinge so that this l

8 Hook Solo/SoloDL to its bracket Fix it using the screws already inserted rear on Solo/SoloDL bracket.