Aim Plug & Play Kit MXL Subaru User Manual

AiM Infotech Plug&Play kit MXL Strada/Pista/Pro/Pro05 for Subaru Impreza 1999-2012 Release 1.04

9 2 Installation kit MXL Plug&Play kit for Subaru Impreza guarantees the maximum ease of installation. 2.1 MXL Strada/Pista kit installation MX

10 The image here below shows the Subaru interface wiring connector plugged in the OBDII plug. Now the system is powered and connected to the vehi

11 Here below two possible MXL installations are shown. If you bought a complete kit you have a complete wiring and you can connect other sensors

12 MXL connection with the ECU is made through the OBDII diagnosis plug placed under the steering wheel column as pointed out here below on the lef

13 Here below is the connection scheme. For further information about MXL Pro/Pro05 pinout refer to MXL user manual freely downloadable from area

14 3.1 Configuration of MXL Strada/Pista Run Race Studio 2 software and follow this path: • press “Device configuration –> MXL” on the software

15 • “ECU Manufacturer” sets automatically on “SUBARU”; • select “ECU Model” according to your vehicle registration year as shown here below2;

16 Please note: as anticipated, Plug&Play kit has no additional sensors so all MXL analog channels as well as Speed_1 are disabled by default.

17 Your MXL display is already configured and the image here below shows the default values. Set channels of the default configuration are: • RP

18 Channels visualized by MXL display (“Measure” fields) are: • ECT (water temperature); • TURBO PRESS (over charging pressure); • TPS (throttle

1 INDEX INDEX 1 PRE-REQUISITES 2 INTRODUCTION 3 1 – Standard kit, optional and part numbers 4 1.1 – MXL Strada basic kit 5 1.2 – MXL Strada complet

19 3.2 MXL Pro/Pro05 configuration Run Race Studio 2 software and follow this path: • press “Device configuration –> MXL” on the software left

20 • select ECU Manufacturer “Subaru”; • select ECU Model corresponding to your vehicle as shown here below3; • set speed, temperature and pre

21 Please note: Plug&Play kit comes with no additional sensors but analog channels and one of the four speeds are enabled by default. This can

22 The MXL display you bought is to be configured: the image here below shows the values recommended by AiM. Channels to set are: • RPM: set on E

23 Channels visualized by MXL display (“Measure” fields) are: • ECT (water temperature); • TURBO PRESS (over charging pressure); • TPS (throttle

24 4 Gear calibration Gear calibration is the last step of MXL configuration. The procedure is as follows: • press “MENU” on MXL keyboard until it

25 5 Sampled channels Channels sampled by MXL depend on the car registration year and on the protocol selected when configuring MXL but not on MXL

26 5.2 Channels sampled by MXL with 2008-2011 protocol ID CHANNEL NAME FUNCTION ECU_1 SSM_RPM RPM ECU_2 SSM_SPEED Vehicle Speed ECU_3 SSM_TP

27 6 Data download When a test session is finished, if you bought an MXL Pista/Pro/Pro05 you can download the recorded data on a PC using the prope

2 PRE-REQUISITES This kit supports Subaru Impreza vehicles from 1999 up to 2012. MXL Strada/Pista/Pro/Pro05 can only be configured in a Windows™ en

3 INTRODUCTION MXL Plug&Play kit for Subaru Impreza is a dash – with data logging feature in Pista version – designed for a quick and easy inst

4 1 Standard kit, optional and part numbers MXL Plug&Play kit for Subaru Impreza is available in different versions, each including only some

5 1.1 MXL Strada basic kit MXL Strada basic kit (part number X16MXLSKBS) includes: • MXL Strada (1) • MXL Strada basic wiring(2) • Subaru interf

6 1.3 MXL Pista basic kit MXL Pista basic kit (part number X16MXLCKBS) includes: • MXL Pista (1) • MXL Pista basic wiring (2) • Subaru interface

7 1.5 MXL Strada/Pista universal kit (if you already have an MXL Strada/Pista) MXL Strada/Pista universal kit for Subaru (part number V02554530) is

8 1.8 Optional Optional items are only available for MXL Strada kits and are: • infrared lap receiver (9) – part number: X41RX19090 • infrared la