1 AiM User Guide Kit for EVO4, Solo and SoloDL on BMW S1000RR Release 1.01
9 If you have installed an AiM EVO4 logger take the cable to the logger. If you have installed an AiM SoloDL logger make the cable pass along the sa
10 4 Configuring with Race Studio 2 When EVO4/SoloDL has been connected it is necessary to set it up as connected to that ECU using Race Studio 2 so
11 The software shows SoloDL configuration page: press “Configuration Manager” and select the configuration you want to use or press “New” to create
12 4.2 Configuring EVO4 Run the software, press “Device configuration” on the software left keyboard and select “EVO4” in the panel that shows up on
13 The software shows EVO4 configuration page: select the configuration you want to use or press “New” to create a new one. In this second case “New
14 5 BMW S1000RR protocol Channels received by SoloDL and EVO4 with BMW “BIKE_S1000RR” protocol are: ID CHANNEL NAME FUNCTION ECU_1 S1_RPM RPM ECU
1 1 Models and years This user guide explains how to install AiM Solo and SoloDL on BMW S1000RR and how to connect EVO4 and SoloDL to the Engine Con
2 2.1 Kit for SoloDL and bracket for Solo SoloDL installation kit is shown here below; part number is: V0256923CS. The kit includes: • 1 bracket (1
3 2.2 AiM cable for SoloDL BMW S1000RR cable for SoloDL is shown below; its part number is: V02569230. The image below shows the cable construction
4 2.3 AiM cable for EVO4 BMW S1000RR cable for EVO4 is shown below; its part number is: V02563200. The image below shows the cable construction sche
5 3 Installation and connection Here you find the instructions to install Solo and SoloDL and to connect EVO4 and SoloDL to your BMW S1000RR bike EC
6 Fix Solo/SoloDL bracket to the adapter bracket for BMW S1000RR using the two countersunk screws. Hook Solo/SoloDL to its bracket. Fix it using the
7 Insert the loose piece in the handle bar hinge until the distance piece abuts the hinge. Tighten the central screw on the hinge so that this last
8 3.2 Connection of SoloDL and EVO4 to the bike ECU To connect EVO4 and SoloDL to the ECU of the bike use the connector you find under the bike tail
Comments to this Manuals